East Coast  Distributors for:

Unipar, Inc.

130 Royal Street

Reedsville, PA 17084

Office: 717-667-3354

Member of:

© Unipar, Inc. All rights reserved. 

  • Unipar, Inc.
Saber Sump Pit

Making the World a Drier & Safer Place

Next-Gen Saber Sump Pit

EXTEND YOU REACH...

Now go to virtually any depth!!

12" Extension
Easily fasten with one or a series of extensions. The Saber Sump Pit can be installed at virtually any depth to maintain critical drainage line elevation requirements.  This feature is ideally suited for use in commercial applications.  The extensions are 12” top to bottom.
Saber Sump Pit Two Piece

Key Features:

Bell shaped Patented design for superior anchoring.

Perforated vertical tank face and tier allow natural well effect, eliminates hydrostatic pressure.

Built-in elevated pump platform provides pump stability and protection against debris.

Larger capacity base holds more water causing pump to run less, extending pump life up to 50%

Recessed clear polycarbonate lid providing a clean, flush-mounted finish with neoprene gasket to properly seal the unit.

Saber Sump Pit Two Piece
Saber Sump Pit 24" One Piece
24" One Piece
The perforated vertical tank face and tier allow previously trapped ground water to freely enter the system and alleviate any damaging conditions that may have formed. These engineered perforations create a natural well effect, which will eliminate hydrostatic pressure and create a dry foundation. Also available Non-Perforated for your project needs.

The Original Saber Sump Pit just got even better!!

27" Two Piece

27" Two Piece
The perforated vertical tank face and tier allow previously trapped ground water to freely enter the system and alleviate any damaging conditions that may have formed. These engineered perforations create a natural well effect, which will eliminate hydrostatic pressure and create a dry foundation. Also available Non-Perforated for your project needs. Installation is completed by Twist & Lock assembly, with visual 'Locked' position creating a sealed unit.

One Piece Dimensions

Design
Unlike any other Sump Pit on the market. The Saber Sump Pit has a bell shape that anchors it down. Will not collapse under soil shifting or ground heaving conditions. Larger lower tank capacity holding 39 gallons of water.
Built-In Pump Platform
The built-in pump platform provides a stable base to protect the pump.  The elevated outer wall localizes sediment accumulations and prevents debris from entering the pump intake. Platform will allow 2-4 pumps depending on pump size.
Storing and Stacking
The Patented Two-Piece design makes storing and stacking easier! Saving costs on shipping and transportation much easier.

Every need covered:

Compact size or confined space?

17" Crawl Space 
When space is limited that a Crawl Space pit is needed. Look no further, with the same patented bell shape design and recessed lid. Non-Perforated has a capacity of 22 gallons! 

Customer Video review of the Saber Sump Pit: 

The Saber Sump Pit can be installed solely for radon mitigation or used as a component in an effective drainage system.

Radon gas is heavier than air. With the Saber Sump Pit installed at the lowest point, radon gas can be vented per EPA specifications.

Radon collects inside the sealed Saber Sump Pit and is then extracted through a radon ventilation system.

 

Example:  The Saber Sump Pit has reduced the radon gas level from

66.66 pCi/L to 1.4 pCi/L.

Radon Gas

The Saber Sump Pit is proud to help preserve the Statue of Liberty for future generations to come.

     Saber Sump Pits installed at the Statue of Liberty.
Liberty Island completed a major overhaul of it's waterproofing system in 2015. Six Saber Sump Pits installed throughout the basement. In each Saber Sump Pit is a Metropolitan Industries Ion SHV100i sump pump. Nearly 5 million tourists visit the Statue of Liberty each year. Protecting and preserving this historical landmark is very comforting. 
"Trust the Saber Sump Pit, She did!"

More testing!! We decided to add 'field test' Enjoy the following...

Field testing with a hammer:

Next we take our Clear Polycarbonate Lid and bend it in half. The same lid after taking multiple hits from the hammer:

Impact Dart Test:

The test equipment being used is to demonstrate energy required to break or rupture the material being tested.

 

During our testing we managed to max out the equipment. Testing dart to the top, maxed out height of over 10 feet high!!

See the results...  

27" Two Piece Saber Sump Pit